eLibrary >
ISO 16273:2020 Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements, methods of testing and required test results >
Expand All
TOC Search:
ISO 16273:2020 Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements, methods of testing and required test results, 2020
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Performance requirements
- 4.1 Functions and their availability
- 4.2 Continuous operation
- 4.3 Standard test target
- 4.4 Detection range
- 4.5 Field of view
- 4.6 Pan and tilt ranges of the field of view
- 4.7 Speeds of panning of the field of view
- 4.8 Stabilisation of the field of view against the motions of the vessel
- 4.9 Heading marker indication
- 4.10 Clear view
- 4.11 Roll and pitch
- 4.12 Optical interference
- 4.13 Line of sight
- 4.14 Controls and ergonomics
- 4.15 Presentation of information
- 4.16 Software
- 4.17 Durability and resistance to environmental conditions
- 4.18 Electrical and electromagnetic interference
- 4.19 Power supply
- 4.20 Back up and fall back arrangements
- 4.21 Malfunctions, alerts and indications
- 4.22 Interfacing
- 4.23 Safety precautions
- 4.24 Acoustic noise and signals
- 4.25 Compass safe distance
- 4.26 Active illumination for active image intensifier system
- 5 Methods of testing and required test results
- 5.1 General test conditions
- 5.1.1 General
- 5.1.2 Performance test
- 5.1.3 Performance check
- 5.1.4 Performance check (EMC)
- 5.2 Environmental tests
- 5.2.1 General
- 5.2.2 Sensor shock test
- 5.2.3 Roll and pitch test
- 5.2.4 Optical interference test
- 5.2.5 Line of sight test
- 5.3 Interface test
- 5.4 Further laboratory tests
- 5.4.1 General
- 5.4.2 Test for all types of night vision equipment
- 5.4.3 Test of thermal imaging systems
- 5.4.4 Test of active image-intensifier systems
- 5.5 Sea trials
- 5.5.1 Introduction
- 5.5.2 Standard test target
- 5.5.3 Test conditions
- 5.5.4 Test procedures
- 6 Marking and identification
- 7 Installation
- 8 Maintenance
- 9 Documentation
- Annex A (informative) Range prediction calculation
- Annex B (informative) Infrared illuminator, typical plots
- Annex C (informative) Sea trial record
- Annex D (normative) Measurement of MTDP (minimum temperature difference perceived) of thermal imagers
- Annex E (normative) Stabilisation test for thermal imaging systems
- Annex F (normative) Stabilisation test active image-intensifier systems
- Bibliography [Go to Page]