Expand All
TOC Search:
ISO 8124-3:2020 Safety of toys - Part 3: Migration of certain elements, 2020
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Maximum acceptable levels
- 4.1 Specific requirements
- 4.2 Interpretation of results
- 5 Principle
- 6 Reagents
- 7 Apparatus
- 8 Selection of test portions
- 9 Preparation and extraction of test portions
- 9.1 Coatings of paint, varnish, lacquer, printing ink, polymer and similar coatings
- 9.1.1 Test portion preparation
- 9.1.2 Extraction procedure
- 9.2 Polymeric and similar material, including laminates, whether textile-reinforced or not, but excluding other textiles
- 9.2.1 Test portion preparation
- 9.2.2 Extraction procedure
- 9.3 Paper and paperboard
- 9.3.1 Test portion preparation
- 9.3.2 Extraction procedure
- 9.4 Natural, artificial or synthetic textiles
- 9.4.1 Test portion preparation
- 9.4.2 Extraction procedure
- 9.5 Glass/ceramic/metallic materials
- 9.5.1 Test portion preparation
- 9.5.2 Extraction procedure
- 9.6 Other materials, whether mass-coloured or not (e.g. wood, fibreboard, bone and leather)
- 9.6.1 Test portion preparation
- 9.6.2 Extraction procedures
- 9.7 Materials intended to leave a trace
- 9.7.1 Test portion preparation for materials in solid form
- 9.7.2 Test portion preparation for materials in liquid form
- 9.7.3 Extraction procedure for samples not containing grease, oil, wax or similar material
- 9.7.4 Extraction procedure for samples containing grease, oil, wax or similar material
- 9.8 Pliable modelling materials, including modelling clays and gels
- 9.8.1 Test portion preparation
- 9.8.2 Extraction procedure for samples not containing grease, oil, wax or similar material
- 9.8.3 Extraction procedure for samples containing grease, oil, wax or similar material
- 9.9 Paints, including finger paints, varnishes, lacquers, glazing powders and similar material in solid or liquid form
- 9.9.1 Test portion preparation for materials in solid form
- 9.9.2 Test portion preparation for materials in liquid form
- 9.9.3 Extraction procedure for samples not containing grease, oil, wax or similar material
- 9.9.4 Extraction procedure for samples containing grease, oil, wax or similar material
- 10 Elemental analysis
- 10.1 Methods of analysis
- 10.2 Method detection limit (MDL)
- 10.3 Calculation of results
- 11 Test report
- Annex A (normative) Sieve requirements
- Annex B (informative) Selection of procedure
- Annex C (informative) Methods for analysis of elements
- Annex D (informative) Background and rationale
- Bibliography [Go to Page]